BREEDLOVE MOUNTS

HANK BREEDLOVE MACHINE SHOP

A job shop for the "RADIO-ACTIVE" MAN and the Original makers of the all Brass quick disconnect coupling since 1975. Look around, I have many new products for you and if not, together we can make what you need….. I offer machine shop services for the Ham radio or CB operator who needs that special Piece of hardware to support that screwdriver antenna or bug catcher. Everything is hand made to close tolerance to match your needs.

Everything that I make for ham radio or CB radio station operators, I make to last a lifetime. Unlike Radio Shack equipment, my equipment for antenna mounting is strong enough to hold any cb radio antenna. Any ham radio equipment that you might need to attach to your antenna tower will be totally secured. Strong enough to handle the antenna booster or motorized tarheel antenna. My mounting bracket for the pick-up truck is a design original that I made for a customer which has proved to be very popular. My coaxial connector is also original and a new design of my own and can be used with the backing plate set up.

Internet radio sales are with fast shipping and your satisfaction guaranteed. PRODUCTS

All brass construction, these CB radio antenna mounts are cut from solid bar stock.

Stainless steel locking bolt on the swivel ball mount for good looks.

Quick disconnect functions on the ball mount and coupling.

1 1/2 inch antenna face on the "flattop" swivel ball mount.

Also, 1 1/2 inch face on the "pedestal" mount.

Extra heavy (1/2-20) mounting bolts, 3/16 cable attachment.

Inter locking insulators, 2 inch OD stainless steel base plates

Can be used with the 4 inch backing Plates as shown to mount to the side of your car.

Aluminum alloy (6061) material used for the stake pocket brackets.

All stainless steel bolts for no rust, good for hard weather.

One size fits ALL trucks, so it is good for whatever you buy.

Designed to fit under a camper top or the tool box on back.

Fast installation, one allen wrench and about two minutes of your time.

Also available as an extra-heavy duty bracket with a top plate 3/8 inch thick to carry the

Really big load. Just won't be able to use under a camper top like the model pictured.

The backing plates are to be used when mounting to the side of your vehicle. Plates are 4 inches in diameter with the plates made from 3/8 inch thick aluminum and the back plate is tapped so that nuts and washers are not needed. The bolts pulling it together are stainless steel with stainless lock washers. Includes a thick rubber washer, center bolt and insulators.

The co-axial cable connectors that I have made ( my own and patent pending design) are made to carry any load. Just like all my stuff. They can be pulled as tight as you want and will not stretch under load. The 1/2-20 threaded stud fits all my mounts and quick disconnects. The 5/8-24 thread is the same as an SO-239 connector and fits the PL-259 plug used on most co-axial cable connectors.

EASY AND SECURE BUYING WITH PAYPAL AND MOST MAJOR CREDIT CARDS

FREE SHIPPING WITH ORDER OF $80 OR MORE. SHIPPING: $10 TO ANYWHERE IN U.S.A.